Concrete slabs in your garage can crack under temperature changes. Water and moisture could get into those cracks, which can compromise your home’s foundation over time. If you want to keep that from happening, then make sure you install a good expansion joint.
When to replace the joint
Those joints won’t last forever, though, not with constant exposure to stress. When that happens, the expansion joint can very well dry out, which means it won’t be able to do the job as well as it used to, How Stuff Works.
How to fix the problem
One way to deal with the problem is to put in a new sidewalk expansion joint filler. Just make sure you clear out any dirt as well as debris from the area. Dig out all the old material in the joints. A putty knife will do just fine. If you can’t remove the remaining debris, a hose can come in handy for that. You could also use a wet-dry vacuum to clean out the joints and between the slabs. Once that’s done, you can apply the bonding adhesive, insert the foam backer rod, then cover and seal the joint. That’s it.
How to get help
If you are hopeless with tools, though, and you never quite manage to follow DIY instructions, then no worries. Look for sidewalk expansion joint filler providers and check if they offer installation services. That way, you won’t need to do the work on your own. You can ask pros to do it for you. With experts to install the filler, you can count on getting fantastic results.
Those cracks and gaps in your concrete may not seem much in the grand scheme of things. But they could lead to a lot of frustration and costly repairs later. It’s simple enough to prevent all that by installing expansion joints and fillers.